Dec 03
Brittany L asked:
I just bought a new all-in-one printer, scanner and copier. It’s an HP Deskjet F2110. However, I put a 74 ink cartridge in it and it’s stuck and won’t come out. Obviously it’s the wrong one, since the printer does not recognize it (yeah, stupid, I know, but Wal-Mart had them sitting in the same display with the printers; I though it was the one that went with it). So, how do I get it out? I’ve tried everything! Even prying it out with butter knives! Any suggestions?
I just bought a new all-in-one printer, scanner and copier. It’s an HP Deskjet F2110. However, I put a 74 ink cartridge in it and it’s stuck and won’t come out. Obviously it’s the wrong one, since the printer does not recognize it (yeah, stupid, I know, but Wal-Mart had them sitting in the same display with the printers; I though it was the one that went with it). So, how do I get it out? I’ve tried everything! Even prying it out with butter knives! Any suggestions?
December 3rd, 2008 at 1:28 pm
buy another one. i’ve been there, done that with a steak knife, and coulldn’t get it out.
December 5th, 2008 at 8:08 pm
take it to where you got it from ask them if it can be fixed if not tell them to refund it plz or return it
December 6th, 2008 at 5:02 am
See if you can reach a finger under it and pop it out that way.
December 7th, 2008 at 11:21 am
If you installed the wrong Ink Cartridge then thats your problem.
Don
December 8th, 2008 at 10:42 am
The last thing you want to do is try and rip it out and ruin the printer or even snap the plastic holster that holds the ink cartridge. Try to wiggle and tug while pushing upwards to ensure no damage to be done, if you cannot remove it its hard to tell you what to do. If it was the right cartridge you can send it of to HP to get a new/repaired machine, but its the wrong one so I doubt they will give support. Just don’t give up just wiggle and pull upwards and good luck to you.
December 9th, 2008 at 5:12 pm
Spray WD-40 on it!
December 9th, 2008 at 11:39 pm
Do NOT force it, any damage you do will invalidate your warranty. Contact hp, they are normally very helpful.
December 11th, 2008 at 4:02 am
i did something like that once LOL!! but i just sat there wiggleing in backwards and falwards and it poped back out just mine was a epson but u cud try it see if it works put a bit of mussle into it to
cause once there in there in but try not 2 stick anythin in there u might break the printer 
December 11th, 2008 at 1:07 pm
Try from under neat, take the cover off (screws), if that don’t work take back to the store, you still have the warranty and good luck and next time buy the right cartridge.